Setting A Cushion Cut Diamond

Diamonds are one of the most precious things on earth. They can be used for designer engagement rings, anniversary gifts, or even just to spoil yourself with something nice. If you’re looking for a cushion-cut diamond shape for your ring that is both elegant and affordable, then you should consider buying a cushion-cut diamond!

Cushion cuts are some of the oldest diamonds in existence and they have been popular since Victorian times because they were considered to represent true love! We will discuss how to set a cushion-cut diamond so that it looks its best!

Use A Diamond Ring to Measure the Size Of The Cushion Cut Stone

Place the cushion cut diamond on a piece of paper and mark its length using your ring size. Use that measurement to determine how large you want the stone to be when it is placed into the setting.

The width of your cushion cut should match this marking while including approximately one-fourth inch extra space at each end for placing in prongs.

To determine the height of the diamond, put your ring down on top and mark its length.

Make sure to include an extra half millimeter for cleaning purposes. This will be the appropriate size cushion cut diamond you want when placing it in a setting with this type of band.

When choosing stones at wholesale prices, knowing how big to get a cushion-cut diamond is crucial to getting the best deal. Do not buy too much or too little for this type of stone because it could cost you money in both instances.

Make Sure the Gem Is Clean and Dry Before You Start

Setting a cushion diamond is a delicate process. Make sure the gem is clean and dry before you start to set it. Use a dish towel or a tissue to wipe off any water droplets from the gem. This will help to keep the scratches on your diamond to a minimum.

Cushion cut diamonds have a lower clarity

A cushion-cut diamond is more likely to have some inclusions on the inside of its facets, which is why they’re priced less than other diamond cuts. You can help your cushion shape stay cleaner by looking for stones that don’t contain many internal inclusions.

Cushion cut diamonds can be found in different colors

Cushion cuts are available in many shapes and sizes, so it’s easy to find cushion-cut diamond engagement rings for any setting or outfit. A cushion-cut diamond is also available in a variety of colors. You can choose from yellow, white, or pink gold settings with this type of gemstone.

Cushion cut diamonds are not as popular as other types

Diamonds like the oval or round cuts tend to cost less because they need fewer facets and take little time for cutting by hand. A cushion-cut diamond is not as popular as other types.

Cushion cut diamonds are great for any setting

A cushion-cut diamond will have more shine than an oval or round shape because it has many facets that allow light to reflect off of the gem in different ways. Within a cushion shape, there are options available with low clarity, high clarity, and different colors. This type of diamond is great for any setting or outfit because it’s available in many shapes and sizes.

If it has been exposed to water or other liquids, make a note of the time when this occurred so that your jeweler can take appropriate steps to remove any residue from its surface. This will help ensure a long life span for your precious gems!

 

Place A Small Amount Of Water On One Side Of Your Finger

If the moisture on your finger is equal to one of your fingers, you are most likely a cushion cut diamond ring size for that finger.

If not, don’t worry. Just try this method with both hands and determine which fits better.

Mark The Ring Position Closely

You must know where you want to wear your ring before measuring it with water because the next step will require assistance from someone else to mark its position closely, if not perfectly accurately on your finger. You could also use a pen or pencil for this purpose as well, but be careful not to touch the ring itself because it should always remain clean and undamaged.

Place The Ring In Warm Water For About 30 Minutes

Don’t let your ring soak in water for too long or you’ll have a mess on your hands! Thirty minutes is just about right for this process, so make sure you check on it regularly.

Once 30 minutes have passed, take it out and place it on a paper towel or cotton cloth. You can also use your bare hands to carefully pat the excess moisture off with your fingertips (or fingers if using both).

Don’t Worry If Your Ring Is A Bit Bigger Or Smaller Than Before

Due to differences in temperature and humidity levels, especially in different regions of the world, you need to know that your ring might be a bit bigger or smaller than before. That’s why it is recommended so long as it fits comfortably on your finger and does not easily slip off over time when worn throughout the day.

You can also use this method for determining the sizes of other rings such as diamond earrings, bracelets, and even necklaces.

Use A Ring Sizer To Check Your Size

When you know your ring size based on the method above, make sure to check it again using a specially designed tool for this purpose called a ring sizer.

This way is more accurate than just measuring with water because of its special abilities that can detect even a quarter or half of a millimeter in size differences.

This is the only way to be absolutely sure that you’re wearing your rings at their best and most comfortable levels!

Wet Both Sides Of Your Finger With Water

Gently dip It into a bowl or pan filled with oil or another lubricant. Don’t use olive oil, vegetable oils, or essential oils because they will oxidize and get sticky.

Mineral oil works well for lubricating fingers while setting diamonds. Don’t use water to moisten your finger if you are using a wax-based lube like beeswax or paraffin because it can cause molding problems down the road.

Rub Your Finger In A Circular Motion Along The Edges Of the Diamond

Gently rub your finger over each of the four edges of the diamond in a circular motion to smooth them and remove any burrs that might have been created during the setting.

This is very important, because if you don’t do this step, then it could cause the diamond to get stuck in the bezel, rendering it difficult or impossible to remove.

Clean Diamond With Alcohol and A Lint-Free Cloth

Using a lint-free cloth, clean off all of the lubricants from your finger and around where you set the diamond so that there isn’t any residue left behind on either surface.

Then, use a cotton swab dipped in alcohol to clean any excess oil from your finger and the back of the diamond.

Gently Press Down On Each Corner Until All Four Corners Are Touching The Surface Beneath Them

When you are done, the cushion-cut diamond should be set perfectly.

When setting a cushion-cut diamond in the ring, you will want to make sure that it is facing up when looking at it. When using an adjustable wrench or screwdriver, place the round part of the tool on top of your cushion cut diamond and gently press down on each corner until all four corners are touching the surface beneath them.

At this point, it should be sitting securely on the surface of the ring without moving. When you are done, your cushion-cut diamond will look like a perfectly set jewel.

More From Wholesale Diamonds TX

How Much It Costs To Get A Diamond GIA Certified

Does Resizing Damage A Ring?

---

Wholesale Diamonds TX offers an extensive selection of genuine loose diamonds, wholesale loose diamonds, diamond rings, GIA-certified diamonds, and more fine jewelry.

Visit our website if you are looking for round cut diamonds, elongated cushion cut diamonds, princess cut diamonds, small diamonds, cushion cut engagement rings, fancy cut diamonds, and other popular diamond shapes!

Call us today and find out why we are the best online wholesale diamonds store in Texas!